Description: Ratchet braceWeighs about 1 pound, 10 ounces, and is about 12 inches long from chuck to headThe main part of the shaft is made of steel about 3/8 inches thickThe chuck and ratchet mechanism are made of machined steelI believe all the steel components are nickel planted, but I am not sureHead and handle are made of woodHead is about 2.25 inches in diameter and about .75 inches thickHandle is a little more than 1.75 inches long and little less than 1 inch wideSweep is a little less than 4.75 inches; about 9.5 inches in complete 360 degree rotationMy grandfather gave this tool to my dad in 1963; and probably had it for many years before thatSo it definitely is at least 60 years old, and likely older This brace would make a fine addition to any: vintage-tool collection or set of woodworking tools ConditionWorks well; as designedHead and handle are free and rotate easily; as designedRatchet mechanism is free and moves easily, as designedChuck is free and opens/closes easily; as designedChuck holds bit tightly when closedKnurl pattern on the shell (chuck tighten/loosen part of shaft) is well definedWooden handles have some (very minor) scratches and wearShaft and other steel parts have some (minor) scratches and wear, but no noticeable pitting or scarsAs usual, see pictures for best sense of condition The brace pictured is the brace that will ship. eBay message me with any questions. Smoke-free home. Combined hipping available. Make an offer! Thanks for looking!
Price: 9.99 USD
Location: Lemont, Illinois
End Time: 2024-12-13T20:12:49.000Z
Shipping Cost: 8.5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Original/Reproduction: Vintage Original
Country/Region of Manufacture: United States
