Set (2) GTS RF2, Level 3+ 10"X12" Edge-to-Edge Mosaic Ceramic Armor Plates

Description: GILLIAM TECHNICAL SERVICES (GTS) - EMERALD ISLE, NC - UNITED STATES OF AMERICA GTS has been in the armor business for 18 years.The NEW NIJ 0101.07 standard is now active. We have tested against every 0101.07 RF2 threat (see test reports in the product images). WE ARE NOT RESPONSIBLE FOR RETURNS RELATED TO PLATES NOT FITTING IN YOUR CARRIER. Please make SURE that these plates will fit before ordering. Thanks!NOTE: Test reports show ceramic batches being tested in various configurations. An edge to edge version of the plate will be shown heavier in the test reports than a standard plate built with the same ceramic. See the diagram in the product images regarding the ceramic content of armor plates and how that impacts overall weight.Specifications:MODEL: GTS-ALUMINA**This model complies with NIJ Standard 0101.06 for Ballistic Resistance of Body Armor.****This model complies with NIJ Standard 0101.07 for Ballistic Resistance of Body Armor.**Some eBay sellers claim that their plates are NIJ Level III certified because of passing an Ak-47 MSC ballistics test OR M855 test (5.56). Remember that the new RF2 category (0101.07) REQUIRES resistance against the 7.62mm x 51mm (M80), 7.62mm x 39mm MSC, M193 and M855. If you have not tested against all of these threats - it is NOT an RF2 plate. If your ebay seller is not testing all of the RF2 threats - and can prove it... he is not complying with the new 0101.07 standard. The new standard requires resistance against the following threats:NIJ RF27.62x51mm M80 BallNATO FMJ Steel Jacket147 +0/-3 grainU.S. military supply orrounds meeting NATOspecifications2780 ft/s(847 m/s)7.62x39mm MSC Ball Ammunition Type 56 from Factory 31Factory 31Ammunition evaluated and meeting the requirements of Appendix A -- NIJ Ammunition Audit Process -- of the standard2400 ft/s(732 m/s)5.56mm M19356 +0/-2 grainU.S. military supply orrounds meeting NATOspecifications3250 ft/s(990 m/s)5.56mm M85561.8 ± 1.5 grainU.S. military supply orrounds meeting NATOspecifications3115 ft/s(950 m/s)This armor plate has been tested in accordance with NIJ 0101.06 AND NIJ 0101.07 standards.Unlike other sellers, we have tested our ceramic against every RF2 threat detailed under the new NIJ 0101.07 standard. NIJ 0101.07 Section 12 allows the armor participant to choose the number of shots per panel. We chose to show our ceramic defeating 6 rounds of 7.62 x 51mm - PLUS resistance against every other RF2 threat identified in 0101.07.This armor plate is made in the USA with global materials and 100% USA adhesives (including source material). EXTRAS: This item comes with a distinct, specially designed 3mm crack arresting layer that reduces ceramic particles and enhances multiple hit performance. Weight: 7 pounds (FULL ceramic coverage).Thickness: 3/4" Size: 10" wide x 12" tallColor: BlackStandard: RF2, NIJ Level III+ Rifle Plate Ballistic Material: Alumina ceramic with UHMWPE backer plate. Ballistic Performance: 7.62x39mm AK47 MSC, 7.62X51mm M80 5.56X45 SS109/M855 (penetrator)/M193, multi-hit capable. Shape: Single curved. Outer Material (cover): Durable black waterproof nylon with plate edge padding and strike face rubberized coating. Shelf Life: Minimum 5 years Plates can be used as front or rear plates. Make sure that the STRIKE FACE (see ballistic tag) is situated toward the threat and the plate(s) is carried in a quality vest or carrier. Superior mosaic ceramic configuration (as opposed to monolithic) allows for multi-hits without performance deterioration of surrounding ceramics. In compliance with the eBay military items policy (see end of this listing) - we have developed the following matrix involving this product: This item is listed on eBay’s US website. The buyer, seller and the item are located in the USA. This product will ONLY be shipped within the USA and NOT to Connecticut or New York. By purchasing, the BUYER certifies that they are a US citizen or permanent resident and are not a convicted felon. Buyer certifies that they are 18 years old or over and can legally purchase and possess the item in their jurisdiction. By purchasing, the BUYER certifies that they shall use the item for personal use only and has no intention of exporting the item outside of the United States. This is NOT a military item (not issued by a military entity). This is a level III hard armor SAPI cut plate (non-military). This item is manufactured by GTS in Emerald Isle, North Carolina. NOTICE: ALL PURCHASES are subject to the Shipping, Returns, Warranty and LEGAL NOTICE in our eBay store. **This model complies with NIJ Standard 0101.06 for Ballistic Resistance of Body Armor.** **This model complies with NIJ Standard 0101.07 for Ballistic Resistance of Body Armor.** We endeavor for all listings to abide by eBay’s military items policy. Here is the policy, in full – from the eBay website: We comply with every line of the policy. Items identified on the US Munitions List found in the ITAR Part 121 that are allowed such as commercially available body armor, firearm scopes, and night vision goggles must follow all applicable laws and meet all of the following criteria: The item is listed on eBay.com (our US website) (complied with - see above) The buyer, the seller, and the item are all located in the US (complied with - see above) The seller specifically states the item will only be shipped domestically (within the US) (complied with - see above) The buyer certifies that they're a US citizen or permanent resident (complied with - see above) The buyer intends to use the item for personal use only and has no intention of exporting the item outside the US (complied with - see above) Body armor is allowed if: It isn't military issued (complied with - see above) It's a level I, II, or III body armor or Small Arms Protection Insert (SAPI) plate which is included in the listing (complied with - see above) The listing includes the manufacturer and model designation with a clear picture that verifies the information (complied with - see above and product images) The listing includes the following disclaimer, "This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor" (complied with - see above).

Price: 349 USD

Location: Emerald Isle, North Carolina

End Time: 2024-12-14T20:17:04.000Z

Shipping Cost: N/A USD