Hohem iSteady V3 3-Axis Phone Gimbal Stabilizer AI Tracker Fill Light for iPhone

Description: Hohem iSteady V3 3-Axis Phone Gimbal Stabilizer AI Tracker Fill Light for iPhoneadvantage: -AI tracking: Equipped with a magnetic suction and light filling AI tracker, it supports AI recognition and tracking of human shapes. The device can be controlled through gestures to achieve intelligent tracking function, without the need for an app, making operation more convenient. -Multi angle shooting: The elevation angle is increased to 120 °, allowing for multi angle shooting. -Fill light: Equipped with a detachable fill light, it supports three color temperature switches of cold light, warm light, and natural light, as well as infinite dimming. The brightness of the fill light can be quickly adjusted through the left dial of the handle or the button on the remote control panel to meet the shooting needs of different scenes. -Portability: Designed with a magnetic quick disconnect structure and embedded with a detachable controller, it can be easily carried and used by users from deployment to startup in one step.Notice: common problem How to connect Bluetooth? 1. Ensure that the stabilizer is turned on. 2. Turn on your phone's Bluetooth, search for devices with the prefix "SV3-" and connect them. 3. Connect according to the pop-up prompt and click pairing. 4. The Bluetooth icon displays blue, indicating that the Bluetooth has been successfully connected. How to set the horizontal/vertical screen direction when the stabilizer is turned on? The stabilizer defaults to vertical screen when first turned on, and the default horizontal/vertical screen direction can be set through the Hohem Joy App. The specific operation is as follows: ① Ensure that the stabilizer Bluetooth is connected; ② Enter the Hohem Joy app and click on [Settings]; ③ Select 【 Stabilizer Parameter Settings 】; ④ Click on the 【 Power on Horizontal/Vertical Screen Direction 】, select the desired power on state, and the stabilizer will synchronously switch to the corresponding state. The next time the stabilizer is turned on, it will default to this power on state. How to set the shutdown save working mode? ① Ensure that the stabilizer Bluetooth is connected; ② Enter the Hohem Joy app and click on [Settings]; ③ Select 【 Stabilizer Parameter Settings 】; ④ Manually switch the stabilizer to the desired saved working mode; ④ Click and open 【 Shutdown Save Working Mode 】. The stabilizer will default to this working mode the next time it is turned on. Is AI tracking unusable or insensitive? Firstly, if shooting in landscape mode, to ensure the best tracking effect, please set the stabilizer to turn on with the default landscape AI tracker facing upwards. Secondly, please ensure that the AI tracker switch is turned on (toggle the power button to "ON" and the fill light flashes twice to indicate successful activation). Thirdly, when using the stabilizer AI following function, attention should be paid to: ① Under normal lighting (ambient light should not be too dim), ensure that both the face and gesture appear in front of the camera, facing the AI camera, and standing 0.5-1.5 meters (approximately 1-2 steps away) away from the AI camera. Using gestures too far or too close may affect the recognition effect; ② Ensure that the tracking distance is within an effective range (the optimal tracking distance is 0.5-3 meters, either too far or too close may affect the tracking effect). What if AI tracking characters are not centered? 1. Ensure that the AI tracker is turned on. 2. Facing the AI camera (0.5-1.5m distance), compare gestures. The green indicator light flashes rapidly, indicating that it has entered a custom state. 3. Adjust the desired composition position and compare gestures again. The indicator light stops flashing, indicating successful customization. How to switch between front/rear camera tracking? Firstly, press and hold the buttons on both sides of the phone holder to unlock and remove the AI tracker (note: forcibly removing the AI tracker without unlocking may cause damage to the product structure). Secondly, install it again after turning 180 °. How to use fill lights? The fill light supports three color temperatures of cold, warm, and natural light, as well as 4% to 100% stepless dimming. It can be turned on, switched on, and adjusted by the side wheel: Long press: turn on/off the fill light; Double click: switch between cold/warm/natural light; Up/Down: Increase/decrease the brightness of the fill light. How long has the stabilizer been in use? The stabilizer is equipped with a 2800mAh battery, and the theoretical battery life is 13 hours when adjusted for balance. When the AI tracking and fill light are working simultaneously, it can be used for about 4 hours. The specific usage time needs to be combined with practical scenarios. Does the stabilizer power on unevenly? Please observe whether the stabilizer clamp position is horizontal. If the clamp position is not horizontal, you can press the M mode key five times to enter automatic calibration mode; If the clamp position is horizontal and the phone lens is not horizontal, it is necessary to remove the phone case or adjust the phone assembly again. How to power on and pair the controller? ① When the controller is installed on the stabilizer: After the stabilizer is turned on, the controller automatically turns on and pairs; ② When the controller and stabilizer are separated: Long press the controller on/off button (shutter button) to turn on the device separately, and it will automatically pair after turning on. How to charge the controller? Method ①: Magnetic suction to the stabilizer handle for charging; Method 2: Connect the standard USB Type C charging cable to the Type C charging interface of the controller for charging. Is the AI tracker and controller Pogo Pin malfunctioning? It is strictly prohibited to frequently touch the Pogo Pin spring pin with your fingers to prevent sweat, dirt, and corrosion, which may cause poor contact and affect the functionality of the tracker and controller.

Price: 99.4 USD

Location: US

End Time: 2024-10-27T06:38:10.000Z

Shipping Cost: 10 USD