Description: 628661 Refrigerator Power Circuit Board Replacement for N41X N51X Series NX NXA Series Product description Fit Type: N41X/ N51X Series- N410, N412, N510, N512.N6X Series - N611, N621, N621F, N623, N624, N641, N641F, N643.N8X Series - N811, N821, N821F, N821V, N822, N822F, N823, N824, N841, N841V, N842, N843.NX/ NXA Series - NX611, NX641, NXA641, NX811, NX841, NXA841.N1095 Series,1200 Series,1210 Series,1211 Series Anti-moisture treatment: The panel is on the outside of the RV, so it is easily disturbed by rain and snow. After spraying and drying the nano waterproof coating on the electronic circuit board, a transparent and colorless molecular waterproof film chain can be formed in the water and attached normally. Protect the components so that water cannot touch the protection components. Timely replacement: When your refrigerator displays the code L1 Op and emits a beeping sound, the power switch is unsuccessful, which may need to be changed to a new panel, carefully check the connection and fuse Oem:628661 Notice:If your refrigerator was manufactured Pre-2006, then this board will not fit,Manufactured before 2006, pin plug connectors (8 in two rows), this product is a single row 628661 ELECTRONIC COMPONENTS The power board is located on the back of the refrigerator below the absorber coils. It is seated on an insulated base to prevent the printed circuit from making contact with the refrigerator cabinet's metal plate. The power board, seated in its base Two self-tapping 1/4 inch hex head screws hold the power board and base in place. The power board cover is held by three self-tapping 1/4 inch hex head screw Removal–Power Board Installation–Power Board 1.Seat the power board in the base.2. Attach the power board and base assembly to therefrigerator using two, 1/4 in. self-tapping hex headscrews. Do not overtighten screws.3. Connect the wire harness connector to the powerboard, terminal P1.4. Connect the ac heater wires to terminals AC_HI andAC_LO.5. Position and align the power board cover over thepower board. Attach the cover using three, 1/4 in.self-tapping hex head screws. Do not overtightenscrews.6. Connect the solenoid gas valve wires to terminalsGV and GV_GND.7. Connect the spark/sense electrode wire to the powerboard high tension terminal.3-way refrigerators (AC/LP/DC)a. Connect the DC heater wires to power boardterminals FLP/DC HEAT and DC_HT GND.8. Connect the ac power cord to the power board.9. Plug ac power cord into the RV ac receptacle.10. Connect positive and the negative dc power wireleads to the power board.TPositive wire (+) to terminal 12VDC.TNegative wire (–) to terminal 12_VGND1.11. Turn ON the RV dc power to the refrigerator.12. Turn ON refrigerator, then check all power boardcontrol functions before placing in service13. Place refrigerator in service Note: There is no manual
Price: 55.49 USD
Location: wuhu
End Time: 2024-08-08T13:18:04.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: mengbo-parts
Manufacturer Part Number: 628661
Part Type: Power Circuit Board
Warranty: 2 Year
