Electrical Solar Panel Cleaning Machine Photovoltaic Clean Brush Telescopic Pole

Description: FUNCTION: The locking structure is adopted and the length of the telescopic rod can be adjusted as desired. Double brush heads, large cleaning surface. The water pipe is equipped with a water control valve that can be connected to the user's water source. High density and large format photovoltaic fiber brushes use imported nylon filaments with extremely high density. The water consumption per square meter is about 1.5–3 litres and the cleaning water consumption is about 9–15 tons per megawatt. Lightweight design, easy to carry. SPECIFICATION: Name: Photovoltaic Cleaning Machine Type: Cleaning brush Head: Double Head Cleaning brush material: new nylon wire Material of telescopic rod: aeronautical aluminium Telescopic rod model: 3.5 m/11.5 foot, 5.5 m/18 foot, 7.5 m/24.6 foot Telescopic rod length/section: 1.5 m-3.5 m (3 sections), 1.8 m-5.5 m (4 sections), 2.1 m-7.5 m (4 sections) Power supply: 220 V Voltage converter: AC100-240 V, DC24 V Cable length: 10 m/32,8 feet Water pipe: 10 m/32,8 feet Brush head width/cleaning diameter: 70 cm Speed: 350U/min PACKAGE CONTAINS: Net version: 1xOperating instructions 1xTelescopic rod 2xbrush head 1x Voltage converter 1xWater pipe 1x 8 m cable NOTE: We ship in 2-packages! [HIGH-Density, LARGE-FORMAT PHOTOVOLTAIN BRUSH] Uses new nylon silk, high density, hand woven to a disc, does not remove hair, does not damage photovoltaic modules, and the cleaning width can reach 65 cm. [STABLE AND LIGHT TELECOMME STAND] Uses 40mm alloy telescopic rod thickened in industrial grade, not easy to bend or shake, length 3.5 m, 5.5 m, 7.5 m, free extension and control. [HIGH COST-EFFICIENCY, LOW CLEANING COST] A person can achieve a cleaning volume from 0.8 MW to 1.2 MW per day. The water-saving design with three water holes consumes 1.5 to 3-litre water per square meter. The water consumption per MW cleaning is about 9–15 tons. [SUPER CLEANING] The double brush heads rotate in opposite directions and are balanced, and the electric brush rotates at high speed for spraying and rubbing, while powerfully removing dust and sticky dirt on the photovoltaic modules. Significantly improves power generation efficiency. [STRONG ADJUSTABILITY] The lightweight design eliminates problems such as uncomfortable cleaning and noise. It is suitable for large area commercial cleaning environments without electricity, such as distributed factory roofs, large power plants, solar power plants in the mountains, etc. 【EASY TO CLEAN】: The entire machine weighs about 10 kg, which facilitates cleaning and cleaning. The structure of the photovoltaic module cleaner has become lightweight and can be held in one hand. We support water pipe connections with an inner diameter of 8mm and the cleaning range of 2 m to 8 m can meet the requirements of different usage environments 【AIR ALUMINIUM TELESCOPSTINGE】: Ultra-light telescopic rod made of aviation aluminum with 40mm diameter. With a locking structure, the length of the telescopic rod can be adjusted as desired. Imported nylon wire, high density, hand woven to a panel, the fiber does not fall off and damage the photovoltaic module 【ELECTRIC PHOTOVOLTAIC CLEANING MACHINE】: Double brush heads rotate counter-rotating and balancing, and the electric brush rotates at high speed to create friction, and at the same time can effectively remove dust and dirt from photovoltaic modules. Compared with single head devices or roller brushes, the double head hedge structure has stronger stability and can be cleaned without water, and water is better

Price: 739.99 USD

Location: Wuxi

End Time: 2024-12-04T02:17:03.000Z

Shipping Cost: 20 USD