Dash Cam Mirror Mount Kit for Universal Car Rear View Universal Mirror Holder

Description: StoreNew ArrivalsAdd to FavoriteView FeedbackContact ☑️ PERFECT COMPATIBILITY: New 16 different joints kit suitable for 99% (NOT ALL) dash camera, Action Camera, GPS and more. The ball dia of the dash cam mount is 0.63inch. ⚠️For easy installation, please make sure the car rearview has (MORE THAN 0.4 INCH) space on the back of the mirror.☑️ BEST DASH CAM COMPANION: Mount your dash cam behind the center of the windshield to make a safe driving, since it allows them to record a clear unobstructed view ahead and doesn't interfere with the view when driving.☑️ STRONG PIPE MOUNT: Tool-less and easy to install & removed, the mirror dash cam mount would be easy to lock on car rear view mirror/bike/motorcycle handlebar and any round pipe dia, Come with two long screws and two short screws, From 0.5- 2.6 inches. ⚠️Kindly check pictures for reference before purchased.☑️ 360° ROTATION FREEDOM: Adjustable ball and socket joint, real 360-degree rotation design, adjust to any angle you need, be it horizontally or vertically, the dash cam mirror mount is completely at your disposal.☑️ ANTI-SKIDDING AND PROTECTIVENESS: Position fixing with practical locking nut, durable construction prevents slipping and breaking and heat-resistant, dashcams for cars never fall off the windshield. Product Description Where exactly should you mount your dashcam? This is a very important question, one that is fundamental to vehicle owners with dashcams. This depends on a few questions. Yes, especially given the name, it may seem that installing a dashcam on the dashboard is the most logical thing to do, but that can directly interfere with the view and make for unsafe driving. Barring the dashboard, the second and most common option is to mount somewhere on the windshield. Now, that is something ideally suitable, depending of course where it is placed. A lot of drivers do prefer to install dashcams on the front windshield because it allows them to record a clear unobstructed view of the road ahead, and doesn’t interfere with the view whatsoever when driving. The best position is right down the center of the windshield, about a few inches down from the headliner. If your dashcam comes with Anumit mirror mount, you should leave enough space so that the device can be easily installed. Which location would be best? Ideally, just behind the rear view mirror. This is the one area of the windshield that is already usually blocked. So, if you install just behind the rear view mirror, you don’t block any additional viewing area, which is perfect. Also, for best results in terms of view angle, when installing take into consideration that the camera is placed right under the rear view mirror handle. This is more or less the center of the windshield. This will ensure that the central view looking out of the windshield will cover the all of the road in front as well as the bonnet of the vehicle you are driving, which is key if you have a car camera with a relatively cheap dash cam with a low view angle of say 140° or less. Come with 16 different joints, suitable for 95% dash cam. Never Fall Down From The Windshield.Strong Pipe Mount 360° Rotation Freedom Anti-Skidding and Protectiveness NOTE: Only compatible with domestic vihicles with mirrors that have a cylindrical shapped stem at least 0.4" long Widely Applicable models Come with 16 different joints, suitable for AUKEY, Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE and other hot selling dash cam.(Including but not limited to). Easy to install and remove Tool-less and easy to install, the product can be installed or removed within minutes thanks to the thumb screws Easy angle adjustment Adjustable ball and socket joint, real 360-degree rotation design, adjust to any angle you need. Specification: Material: Plastic and rubber Weight: 4.9 oz Clamping Diameter range: 0.5- 2.6 inches Ultra-slim 9.20mm design to suit 94% car rear view mirror. Real 360-degree rotation design, adjust to any angle you need. Solid, high-quality workmanship way Stable and secure mounting Position fixing with practical locking nut All connectors and controls remain accessible .

Price: 16.79 USD

Location: Phoenix, AZ

End Time: 2024-01-02T19:20:02.000Z

Shipping Cost: 0 USD