Cerwin Vega 15" Speaker Foam Surround Repair Kit AT LS others Angle (pair)

Description: Foam dimensions. These foams are slightly different, and done that way by painstaking research and design. If you’re familiar with refoaming Cerwins, you’ve undoubtedly seen where the ID of the foam is just slightly too large, so when you’re done, you can see a little of the old glue ring inside your new foam, leaving a sloppy look. I specified these foams to be exactly a little different from the rest out there, and had them produced, from scratch, just for me, and now for you. So, these foams are not the same as any other you have ever gotten. First, if you measure the glue ring on a 15” Cerwin woofer cone, it comes in around 1/8 smaller, than the ID dimension of the other foams out there. (leaving that unsightly ring) These foams have a slightly smaller ID, giving you a 1/8 cushion all the way around, so when you are done, you will have a clean look. On the OD, you will also see that my foams have a larger OD, so you have more flat foam to glue to your frame. Some of the other kits are so stingy, you have just a little bit. These are wider, like Cerwin Vega originally used, although not so wide, that you run out of adjustment space when centering the cone. Then, there’s thickness. There’s a wide variance out there. These are thicker than the cheap China ones, and correct for the woofers listed. (these are different than, and not for, the clsc and xls woofers) And of course, color. Cerwin used red over gray. These are red over gray. Not paper thin like the red ones they sell from China. Not pink over gray like many sellers have. But correct thickness, RED, over gray. Glue: I’ve refoamed and reconed many hundreds of woofers over decades, and tried every glue there is. I’m including two types with these kits, and they are both the best quality you can get. One is a faster drying glue. Use that for the foam to cone joint. The other bottle, is for the foam to the frame. That is a slower drying glue, which will give you plenty of time to make your adjustments centering the cone. Includes tips and tricks learned from decades of doing this myself. This kit includes two foams, and fit almost every Cerwin Vega 15” woofer made with angle attach. The exceptions are the CLSC and XLS woofers, and any woofer with a flat attach. It's hard to make a complete list, as Cerwin used many different cones and foams, with all differing dimensions (even on the same model there were many variences), and recones over the years have changed styles too. The best way to get the closest foam to what you need refoamed, is by measurements, not model. These foams have an ID of about 292mm when glued. I also have other foams with a slightly larger ID for woofers like the DX9 DXW15, RE38 REW15, VS150 VSW15, M100, Mx400, etc. If you have any questions, don’t hesitate to reach out. If you're not sure if these will work, shoot me a picture and I'll tell you. These are, the absolute best kits available. You can save twelve bucks, and look at glue rings and pink foams for the next 20 years, or spend the extra $12 and get the very best. If you want quantity, don’t need glue, etc, reach out. I will put together whatever kind of package you want. Will be packed securely and shipped promptly. This kit includes two foams. Thanks!

Price: 35.99 USD

Location: Milwaukee, Wisconsin

End Time: 2024-09-16T02:29:44.000Z

Shipping Cost: 0 USD